NAME

SYNOPSIS

DESCRIPTION

-c string

ksh will execute the command(s) contained in string.

-i

Interactive shell. A shell is “interactive” if this option is used or if both standard input and standard error are attached to a tty(4). An interactive shell has job control enabled, ignores the SIGINT, SIGQUIT, and SIGTERM signals, and prints prompts before reading input (see the PS1 and PS2 parameters). For non-interactive shells, the trackall option is on by default (see the set command below).

-l

Login shell. If the basename the shell is called with (i.e. argv[0]) starts with "-" or if this option is used, the shell is assumed to be a login shell and the shell reads and executes the contents of /etc/profile and $HOME/.profile if they exist and are readable.

-p

Privileged shell. A shell is “privileged” if this option is used or if the real user ID or group ID does not match the effective user ID or group ID (see getuid(2) and getgid(2/)). A privileged shell does not process $HOME/.profile nor the ENV parameter (see below). Instead, the file /etc/suid_profile is processed. Clearing the privileged option causes the shell to set its effective user ID (group ID) to its real user ID (group ID).

-r

Restricted shell. A shell is “restricted” if this option is used; if the basename the shell was invoked with was “rksh”; or if the SHELL parameter is set to “rksh”. The following restrictions come into effect after the shell processes any profile and ENV files:

• The cd command is disabled.
• The SHELL, ENV, and PATH parameters cannot be changed.
• Command names can't be specified with absolute or relative paths.
• The -p option of the built-in command command can't be used.
• Redirections that create files can't be used (i.e.\& "\*(Gt", "\*(Gt\*(Ba", "\*(Gt\*(Gt", "\*(Lt\*(Gt")).

-s

The shell reads commands from standard input; all non-option arguments are positional parameters.

\&. /etc/ksh.kshrc

Command syntax

$ false && echo foo || echo bar
$ true || echo foo && echo bar

case     else     function     then      !
do       esac     if           time      [[
done     fi       in           until     {
elif     for      select       while     }

$ { echo foo; echo bar; }
$ { echo foo; echo bar\*(Ltnewline\*(Gt }
$ { { echo foo; echo bar; } }

(list)

Execute list in a subshell. There is no implicit way to pass environment changes from a subshell back to its parent.

{ list; }

Compound construct; list is executed, but not in a subshell. Note that "{" and "}" are reserved words, not meta-characters.

.Oo Op ( \pattern [\*(Ba pattern] ... ) list;;\ \& Oc ... esac The case statement attempts to match word against a specified pattern; the list associated with the first successfully matched pattern is executed. Patterns used in case statements are the same as those used for file name patterns except that the restrictions regarding "\&." and "/" are dropped. Note that any unquoted space before and after a pattern is stripped; any space within a pattern must be quoted. Both the word and the patterns are subject to parameter, command, and arithmetic substitution, as well as tilde substitution. For historical reasons, open and close braces may be used instead of in and esac e.g.\& case$foo { *) echo bar; }. The exit status of a case statement is that of the executed list; if no list is executed, the exit status is zero.

.Oo in Ar word No ... Oc ; do list; done For each word in the specified word list, the parameter name is set to the word and list is executed. If in is not used to specify a word list, the positional parameters ($1, $2, etc.)\& are used instead. For historical reasons, open and close braces may be used instead of do and done e.g.\& fori; { echo $i; }. The exit status of a for statement is the last exit status of list; if list is never executed, the exit status is zero.

then list; .Oo elif Ar list ; then list; Oc ... .Oo else Ar list ; Oc fi If the exit status of the first list is zero, the second list is executed; otherwise, the list following the elif, if any, is executed with similar consequences. If all the lists following the if and elif fail (i.e. exit with non-zero status), the list following the else is executed. The exit status of an if statement is that of non-conditional list that is executed; if no non-conditional list is executed, the exit status is zero.

.Oo in Ar word No ... Oc ; do list; done The select statement provides an automatic method of presenting the user with a menu and selecting from it. An enumerated list of the specified word is printed on standard error, followed by a prompt ( PS3:normally ‘#?\ \&’ ). A number corresponding to one of the enumerated words is then read from standard input, name is set to the selected word (or unset if the selection is not valid), REPLY is set to what was read (leading/trailing space is stripped), and list is executed. If a blank line (i.e. zero or more IFS characters) is entered, the menu is reprinted without executing list.

When list completes, the enumerated list is printed if REPLY is NULL, the prompt is printed, and so on. This process continues until an end-of-file is read, an interrupt is received, or a break statement is executed inside the loop. If “in word”... is omitted, the positional parameters are used (i.e. $1, $2, etc.). For historical reasons, open and close braces may be used instead of do and done e.g.\& selecti; { echo $i; }. The exit status of a select statement is zero if a break statement is used to exit the loop, non-zero otherwise.

do list; done This works like while, except that the body is executed only while the exit status of the first list is non-zero.

do list; done A while is a pre-checked loop. Its body is executed as often as the exit status of the first list is zero. The exit status of a while statement is the last exit status of the list in the body of the loop; if the body is not executed, the exit status is zero.

{ list; } Defines the function name (see below). Note that redirections specified after a function definition are performed whenever the function is executed, not when the function definition is executed.

name

Mostly the same as function (see below).

[pipeline] The time reserved word is described in the section.

(( expression))

The arithmetic expression expression is evaluated; equivalent to “let expression” (see and the let command, below).

[[\\&expression\ \&]]

Similar to the test and \&[... \&] commands (described later), with the following exceptions:

• Field splitting and file name generation are not performed on arguments.
• The -a (AND) and -o (OR) operators are replaced with "&&" and "||", respectively.
• Operators (e.g.\& ‘-f’, ‘=’, ‘\&!’) must be unquoted.
• The second operand of the ‘!=’ and ‘=’ expressions are patterns (e.g. the comparison [[foobar = f*r]] succeeds).
• There are two additional binary operators, "\*(Lt" and "\*(Gt", which return true if their first string operand is less than, or greater than, their second string operand, respectively.
• The single argument form of test, which tests if the argument has a non-zero length, is not valid; explicit operators must always be used e.g. instead of \&[ str\&] use \&[[ -n str\&]].
• Parameter, command, and arithmetic substitutions are performed as expressions are evaluated and lazy expression evaluation is used for the "&&" and "||" operators. This means that in the following statement, $(\*(Ltfoo) is evaluated if and only if the file foo exists and is readable:

  $ [[ -r foo && $(\*(Lt foo) = b*r ]]
  

Quoting

Aliases

autoload='typeset -fu'
functions='typeset -f'
hash='alias -t'
history='fc -l'
integer='typeset -i'
local='typeset'
login='exec login'
nohup='nohup '
r='fc -e -'
stop='kill -STOP'
suspend='kill -STOP $$'
type='whence -v'

Substitution

Parameters

.Sm off

${ name:- word}

.Sm on If name is set and not NULL, it is substituted; otherwise, word is substituted. .Sm off

${ name:+ word}

.Sm on If name is set and not NULL, word is substituted; otherwise, nothing is substituted. .Sm off

${ name:= word}

.Sm on If name is set and not NULL, it is substituted; otherwise, it is assigned word and the resulting value of name is substituted. .Sm off

${ name:? word}

.Sm on If name is set and not NULL, it is substituted; otherwise, word is printed on standard error (preceded by name::) and an error occurs (normally causing termination of a shell script, function, or script sourced using the ‘\&.’ built-in). If word is omitted, the string “parameter null or not set” is used instead.

Pf ${#

The number of positional parameters if name is "*", "@", or not specified; otherwise the length of the string value of parameter name.

Pf ${#

Pf ${#

The number of elements in the array name.

.Sm off

.Pf ${ Ar name .Pf # Ar pattern No }

.Pf ${ Ar name .Pf ## Ar pattern No } .Sm on If pattern matches the beginning of the value of parameter name, the matched text is deleted from the result of substitution. A single "#" results in the shortest match, and two of them result in the longest match.

.Sm off

.Pf ${ Ar name .Pf % Ar pattern No }

.Pf ${ Ar name .Pf %% Ar pattern No } .Sm on Like ${..#..} substitution, but it deletes from the end of the value.

\&!

Process ID of the last background process started. If no background processes have been started, the parameter is not set.

\&#

The number of positional parameters ($1, $2, etc.).

\&$

The PID of the shell, or the PID of the original shell if it is a subshell. Do NOT use this mechanism for generating temporary file names; see mktemp(1) instead.

-

The concatenation of the current single letter options (see the set command below for a list of options).

\&?

The exit status of the last non-asynchronous command executed. If the last command was killed by a signal, $?\& is set to 128 plus the signal number.

0

The name of the shell, determined as follows: the first argument to ksh if it was invoked with the -c option and arguments were given; otherwise the file argument, if it was supplied; or else the basename the shell was invoked with (i.e.\& argv[0]). $0 is also set to the name of the current script or the name of the current function, if it was defined with the function keyword (i.e. a Korn shell style function).

1... 9

The first nine positional parameters that were supplied to the shell, function, or script sourced using the ‘\&.’ built-in. Further positional parameters may be accessed using .Pf ${ Ar number Ns } .

*

All positional parameters (except parameter 0) i.e. $1, $2, $3, ... If used outside of double quotes, parameters are separate words (which are subjected to word splitting); if used within double quotes, parameters are separated by the first character of the IFS parameter (or the empty string if IFS is NULL)).

@

Same as $*, unless it is used inside double quotes, in which case a separate word is generated for each positional parameter. If there are no positional parameters, no word is generated. $@ can be used to access arguments, verbatim, without losing NULL arguments or splitting arguments with spaces.

_(underscore)

When an external command is executed by the shell, this parameter is set in the environment of the new process to the path of the executed command. In interactive use, this parameter is also set in the parent shell to the last word of the previous command. When MAILPATH messages are evaluated, this parameter contains the name of the file that changed (see the MAILPATH parameter, below).

CDPATH

Search path for the cd built-in command. It works the same way as PATH for those directories not beginning with "/" in cd commands. Note that if CDPATH is set and does not contain ‘\&.’ or contains an empty path, the current directory is not searched. Also, the cd built-in command will display the resulting directory when a match is found in any search path other than the empty path.

COLUMNS

Set to the number of columns on the terminal or window. Currently set to the “cols” value as reported by stty(1) if that value is non-zero. This parameter is used by the interactive line editing modes, and by the select, set-o, and kill-l commands to format information columns.

EDITOR

If the VISUAL parameter is not set, this parameter controls the command-line editing mode for interactive shells. See the VISUAL parameter below for how this works.

Note: traditionally, EDITOR was used to specify the name of an (old-style) line editor, such as ed(1), and VISUAL was used to specify a (new-style) screen editor, such as vi(1). Hence if VISUAL is set, it overrides EDITOR.

ENV

If this parameter is found to be set after any profile files are executed, the expanded value is used as a shell startup file. It typically contains function and alias definitions.

ERRNO

Integer value of the shell's errno variable. It indicates the reason the last system call failed. Not yet implemented.

EXECSHELL

If set, this parameter is assumed to contain the shell that is to be used to execute commands that execve(2) fails to execute and which do not start with a “#! ” sequence.

FCEDIT

The editor used by the fc command (see below).

FPATH

Like PATH, but used when an undefined function is executed to locate the file defining the function. It is also searched when a command can't be found using PATH. See below for more information.

HISTFILE

The name of the file used to store command history. When assigned to, history is loaded from the specified file. Also, several invocations of the shell running on the same machine will share history if their HISTFILE parameters all point to the same file.

Note: If HISTFILE isn't set, no history file is used. This is different from the original Korn shell, which uses $HOME/.sh_history; in the future, pdksh may also use a default history file.

HISTSIZE

The number of commands normally stored for history. The default is 500.

HOME

The default directory for the cd command and the value substituted for an unqualified ~ (see below).

IFS

Internal field separator, used during substitution and by the read command, to split values into distinct arguments; normally set to space, tab, and newline. See above for details.

Note: This parameter is not imported from the environment when the shell is started.

KSH_VERSION

The version of the shell and the date the version was created (read-only).

LINENO

The line number of the function or shell script that is currently being executed.

LINES

Set to the number of lines on the terminal or window.

MAIL

If set, the user will be informed of the arrival of mail in the named file. This parameter is ignored if the MAILPATH parameter is set.

MAILCHECK

How often, in seconds, the shell will check for mail in the file(s) specified by MAIL or MAILPATH. If set to 0, the shell checks before each prompt. The default is 600 (10 minutes).

MAILPATH

A list of files to be checked for mail. The list is colon separated, and each file may be followed by a "\&?" and a message to be printed if new mail has arrived. Command, parameter, and arithmetic substitution is performed on the message, and, during substitution, the parameter $_ contains the name of the file. The default message is “you have mail in $_”.

OLDPWD

The previous working directory. Unset if cd has not successfully changed directories since the shell started, or if the shell doesn't know where it is.

OPTARG

When using getopts, it contains the argument for a parsed option, if it requires one.

OPTIND

The index of the next argument to be processed when using getopts. Assigning 1 to this parameter causes getopts to process arguments from the beginning the next time it is invoked.

PATH

A colon separated list of directories that are searched when looking for commands and files sourced using the ‘\&.’ command (see below). An empty string resulting from a leading or trailing colon, or two adjacent colons, is treated as a ‘\&.’ (the current directory).

POSIXLY_CORRECT

If set, this parameter causes the posix option to be enabled. See below.

PPID

The process ID of the shell's parent (read-only).

PS1

The primary prompt for interactive shells. Parameter, command, and arithmetic substitutions are performed, and the prompt string can be customised using backslash-escaped special characters.

Note that since the command-line editors try to figure out how long the prompt is (so they know how far it is to the edge of the screen), escape codes in the prompt tend to mess things up. You can tell the shell not to count certain sequences (such as escape codes) by using the \e[ substitution (see below) or by prefixing your prompt with a non-printing character (such as control-A) followed by a carriage return and then delimiting the escape codes with this non-printing character. By the way, don't blame me for this hack; it's in the original ksh.

The default prompt is ‘$\ \&’ for non-root users, ‘#\ \&’ for root. If ksh is invoked by root and PS1 does not contain a ‘#’ character, the default value will be used even if PS1 already exists in the environment.

The following backslash-escaped special characters can be used to customise the prompt:

\ea

Insert an ASCII bell character.

\ed

The current date, in the format “Day Month Date” for example “Wed Nov 03”.

\eD{

The current date, with format converted by strftime(3). The braces must be specified.

\ee

Insert an ASCII escape character.

\eh

The hostname, minus domain name.

\eH

The full hostname, including domain name.

\ej

Current number of jobs running (see below).

\el

The controlling terminal.

\en

Insert a newline character.

\er

Insert a carriage return character.

\es

The name of the shell.

\et

The current time, in 24-hour HH:MM:SS format.

\eT

The current time, in 12-hour HH:MM:SS format.

\e@

The current time, in 12-hour HH:MM:SS AM/PM format.

\eA

The current time, in 24-hour HH:MM format.

\eu

The current user's username.

\ev

The current version of ksh.

\eV

Like ‘\ev’, but more verbose.

\ew

The current working directory. $HOME is abbreviated as ‘~’.

\eW

The basename of the current working directory.

\e!

The current history number. An unescaped "!\&" will produce the current history number too, as per the POSIX specification. A literal "\&!" can be put in the prompt by placing ""!! in PS1.

\e#

The current command number. This could be different to the current history number, if HISTFILE contains a history list from a previous session.

\e$

The default prompt i.e.\& ‘# \&’ if the effective UID is 0, otherwise ‘$ \&’. Since the shell interprets ‘$’ as a special character within double quotes, it is safer in this case to escape the backslash than to try quoting it.

\e

The octal character nnn.

\e\e

Insert a single backslash character.

\e[

Normally the shell keeps track of the number of characters in the prompt. Use of this sequence turns off that count.

\e]

Use of this sequence turns the count back on.

Note that the backslash itself may be interpreted by the shell. Hence, to set PS1 either escape the backslash itself, or use double quotes. The latter is more practical:

PS1="\eu "

This is a more complex example, which does not rely on the above backslash-escaped sequences. It embeds the current working directory, in reverse video, in the prompt string:

x=$(print \e\e001)
PS1="$x$(print \e\er)$x$(tput so)$x\e$PWD$x$(tput se)$x\*(Gt "

PS2

Secondary prompt string, by default ‘\*(Gt\ \&’, used when more input is needed to complete a command.

PS3

Prompt used by the select statement when reading a menu selection. The default is ‘#?\ \&’.

PS4

Used to prefix commands that are printed during execution tracing (see the set-x command below). Parameter, command, and arithmetic substitutions are performed before it is printed. The default is ‘+\ \&’.

PWD

The current working directory. May be unset or NULL if the shell doesn't know where it is.

RANDOM

A random number generator. Every time RANDOM is referenced, it is assigned the next random number in the range 0\-32767. By default, arc4random(3) is used to produce values. If the variable RANDOM is assigned a value, the value is used as the seed to srand(3) and subsequent references of RANDOM will use rand(3) to produce values, resulting in a predictable sequence.

REPLY

Default parameter for the read command if no names are given. Also used in select loops to store the value that is read from standard input.

SECONDS

The number of seconds since the shell started or, if the parameter has been assigned an integer value, the number of seconds since the assignment plus the value that was assigned.

TMOUT

If set to a positive integer in an interactive shell, it specifies the maximum number of seconds the shell will wait for input after printing the primary prompt (PS1). If the time is exceeded, the shell exits.

TMPDIR

The directory temporary shell files are created in. If this parameter is not set, or does not contain the absolute path of a writable directory, temporary files are created in /tmp.

VISUAL

If set, this parameter controls the command-line editing mode for interactive shells. If the last component of the path specified in this parameter contains the string “vi”, “emacs”, or “gmacs”, the vi(), emacs(), or gmacs() (Gosling emacs) editing mode is enabled, respectively. See also the EDITOR parameter, above.

Tilde expansion

Brace expansion (alteration)

File name patterns

\&?

Matches any single character.

\&*

Matches any sequence of characters.

[..][..]

Matches any of the characters inside the brackets. Ranges of characters can be specified by separating two characters by a "-" (e.g.\& “[a0-9]” matches the letter ‘a’ or any digit). In order to represent itself, a "-" must either be quoted or the first or last character in the character list. Similarly, a "\&]" must be quoted or the first character in the list if it is to represent itself instead of the end of the list. Also, a "\&!" appearing at the start of the list has special meaning (see below), so to represent itself it must be quoted or appear later in the list.

Within a bracket expression, the name of a character class enclosed in ‘’[: and ‘’:] stands for the list of all characters belonging to that class. Supported character classes:

alnum	cntrl	lower	space
alpha	digit	print	upper
blank	graph	punct	xdigit

These match characters using the macros specified in ctype(3). A character class may not be used as an endpoint of a range.

[!..][!..]

Like [..], except it matches any character not inside the brackets. .Sm off

*( pattern\*(Ba...\*(Ba pattern)

.Sm on Matches any string of characters that matches zero or more occurrences of the specified patterns. Example: The pattern *(foo|bar) matches the strings “”, “foo”, “bar”, “foobarfoo”, etc. .Sm off

+( pattern\*(Ba...\*(Ba pattern)

.Sm on Matches any string of characters that matches one or more occurrences of the specified patterns. Example: The pattern +(foo|bar) matches the strings “foo”, “bar”, “foobar”, etc. .Sm off

?( pattern\*(Ba...\*(Ba pattern)

.Sm on Matches the empty string or a string that matches one of the specified patterns. Example: The pattern ?(foo|bar) only matches the strings “”, “foo”, and “bar”. .Sm off

@( pattern\*(Ba...\*(Ba pattern)

.Sm on Matches a string that matches one of the specified patterns. Example: The pattern @(foo|bar) only matches the strings “foo” and “bar”. .Sm off

!( pattern\*(Ba...\*(Ba pattern)

.Sm on Matches any string that does not match one of the specified patterns. Examples: The pattern !(foo|bar) matches all strings except “foo” and “bar”; the pattern !(*) matches no strings; the pattern !(?)*\& matches all strings (think about it).

Input/output redirection

\*(Gt file

Standard output is redirected to file. If file does not exist, it is created; if it does exist, is a regular file, and the noclobber option is set, an error occurs; otherwise, the file is truncated. Note that this means the command cmd\*(Lt foo \*(Gt foo will open foo for reading and then truncate it when it opens it for writing, before cmd gets a chance to actually read foo.

\*(Gt\*(Ba file

Same as \*(Gt, except the file is truncated, even if the noclobber option is set.

\*(Gt\*(Gt file

Same as \*(Gt, except if file exists it is appended to instead of being truncated. Also, the file is opened in append mode, so writes always go to the end of the file (see open(2/)).

\*(Lt file

Standard input is redirected from file, which is opened for reading.

\*(Lt\*(Gt file

Same as \*(Lt, except the file is opened for reading and writing.

\*(Lt\*(Lt marker

After reading the command line containing this kind of redirection (called a “here document)”, the shell copies lines from the command source into a temporary file until a line matching marker is read. When the command is executed, standard input is redirected from the temporary file. If marker contains no quoted characters, the contents of the temporary file are processed as if enclosed in double quotes each time the command is executed, so parameter, command, and arithmetic substitutions are performed, along with backslash (‘\e’) escapes for "$", "`", "\e", and "\enewline". If multiple here documents are used on the same command line, they are saved in order.

\*(Lt\*(Lt- marker

Same as \*(Lt\*(Lt, except leading tabs are stripped from lines in the here document.

\*(Lt& fd

Standard input is duplicated from file descriptor fd. fd can be a single digit, indicating the number of an existing file descriptor; the letter "p", indicating the file descriptor associated with the output of the current co-process; or the character "-", indicating standard input is to be closed.

\*(Gt& fd

Same as \*(Lt&, except the operation is done on standard output.

Arithmetic expressions

+ - ! ~ ++ --

,
= *= /= %= += -= \*(Lt\*(Lt= \*(Gt\*(Gt= &= ^= \*(Ba=
\*(Ba\*(Ba
&&
\*(Ba
^
&
== !=
\*(Lt \*(Lt= \*(Gt= \*(Gt
\*(Lt\*(Lt \*(Gt\*(Gt
+ -
* / %

?: (precedence is immediately higher than assignment)

( )

unary +

Result is the argument (included for completeness).

unary -

Negation.

\&!

Logical NOT; the result is 1 if argument is zero, 0 if not.

~

Arithmetic (bit-wise) NOT.

++

Increment; must be applied to a parameter (not a literal or other expression). The parameter is incremented by 1. When used as a prefix operator, the result is the incremented value of the parameter; when used as a postfix operator, the result is the original value of the parameter.

--

Similar to ++, except the parameter is decremented by 1.

\&,

Separates two arithmetic expressions; the left-hand side is evaluated first, then the right. The result is the value of the expression on the right-hand side.

=

Assignment; the variable on the left is set to the value on the right.

*= /= += -= \*(Lt\*(Lt= \*(Gt\*(Gt= &= ^= \*(Ba= Assignment operators. .Sm off ‹› ‹op› = ‹expr› .Sm on is the same as .Sm off ‹› = ‹var› ‹op› ‹expr›, .Sm on with any operator precedence in ‹expr› preserved. For example, “var1 *= 5 + 3” is the same as specifying “var1 = var1 * (5 + 3)”.

\*(Ba\*(Ba

Logical OR; the result is 1 if either argument is non-zero, 0 if not. The right argument is evaluated only if the left argument is zero.

&&

Logical AND; the result is 1 if both arguments are non-zero, 0 if not. The right argument is evaluated only if the left argument is non-zero.

\*(Ba

Arithmetic (bit-wise) OR.

^

Arithmetic (bit-wise) XOR (exclusive-OR).

&

Arithmetic (bit-wise) AND.

==

Equal; the result is 1 if both arguments are equal, 0 if not.

!=

Not equal; the result is 0 if both arguments are equal, 1 if not.

\*(Lt

Less than; the result is 1 if the left argument is less than the right, 0 if not.

\*(Lt= \*(Gt= \*(Gt

Less than or equal, greater than or equal, greater than. See \*(Lt.

\*(Lt\*(Lt \*(Gt\*(Gt

Shift left (right); the result is the left argument with its bits shifted left (right) by the amount given in the right argument.

+ - * /

Addition, subtraction, multiplication, and division.

%

Remainder; the result is the remainder of the division of the left argument by the right. The sign of the result is unspecified if either argument is negative.

.Sm off ‹arg1›? ‹arg2›: ‹arg3› .Sm on If ‹arg1› is non-zero, the result is ‹arg2›; otherwise the result is ‹arg3›.

Co-processes

• The only way to close the co-process's input (so the co-process reads an end-of-file) is to redirect the input to a numbered file descriptor and then close that file descriptor e.g.\& exec3\*(Gt&p; exec 3\*(Gt&-.
• In order for co-processes to share a common output, the shell must keep the write portion of the output pipe open. This means that end-of-file will not be detected until all co-processes sharing the co-process's output have exited (when they all exit, the shell closes its copy of the pipe). This can be avoided by redirecting the output to a numbered file descriptor (as this also causes the shell to close its copy). Note that this behaviour is slightly different from the original Korn shell which closes its copy of the write portion of the co-process output when the most recently started co-process (instead of when all sharing co-processes) exits.
• print-p will ignore SIGPIPE signals during writes if the signal is not being trapped or ignored; the same is true if the co-process input has been duplicated to another file descriptor and print-u is used.

Functions

• The $0 parameter is set to the name of the function (Bourne-style functions leave $0 untouched).
• Parameter assignments preceding function calls are not kept in the shell environment (executing Bourne-style functions will keep assignments).
• OPTIND is saved/reset and restored on entry and exit from the function so getopts can be used properly both inside and outside the function (Bourne-style functions leave OPTIND untouched, so using getopts inside a function interferes with using getopts outside the function).

• A separate trap/signal environment will be used during the execution of functions. This will mean that traps set inside a function will not affect the shell's traps and signals that are not ignored in the shell (but may be trapped) will have their default effect in a function.
• The EXIT trap, if set in a function, will be executed after the function returns.

POSIX mode

• Occurrences of \e\&" inside double quoted `..` command substitutions. In POSIX mode, the \e\&" is interpreted when the command is interpreted; in non-POSIX mode, the backslash is stripped before the command substitution is interpreted. For example, echo\&"`echo \e\&"hi\e\&"`\&" produces “\&"hi\&"” in POSIX mode, “hi” in non-POSIX mode. To avoid problems, use the $(...)\& form of command substitution.
• kill-l output. In POSIX mode, only signal names are listed (in a single line); in non-POSIX mode, signal numbers, names, and descriptions are printed (in columns). In the future, a new option (-v perhaps) will be added to distinguish the two behaviours.
• echo options. In POSIX mode, -e and -E are not treated as options, but printed like other arguments; in non-POSIX mode, these options control the interpretation of backslash sequences.
• fg exit status. In POSIX mode, the exit status is 0 if no errors occur; in non-POSIX mode, the exit status is that of the last foregrounded job.
• eval exit status. If eval gets to see an empty command (i.e.\& eval`false`), its exit status in POSIX mode will be 0. In non-POSIX mode, it will be the exit status of the last command substitution that was done in the processing of the arguments to eval (or 0 if there were no command substitutions).
• getopts. In POSIX mode, options must start with a "-"; in non-POSIX mode, options can start with either "-" or "+".
• Brace expansion (also known as alternation). In POSIX mode, brace expansion is disabled; in non-POSIX mode, brace expansion is enabled. Note that set-o posix (or setting the POSIXLY_CORRECT parameter) automatically turns the braceexpand option off; however, it can be explicitly turned on later.
• set-. In POSIX mode, this does not clear the verbose or xtrace options; in non-POSIX mode, it does.
• set exit status. In POSIX mode, the exit status of set is 0 if there are no errors; in non-POSIX mode, the exit status is that of any command substitutions performed in generating the set command. For example, set-- `false`; echo $?\& prints 0 in POSIX mode, 1 in non-POSIX mode. This construct is used in most shell scripts that use the old getopt(1) command.
• Argument expansion of the alias, export, readonly, and typeset commands. In POSIX mode, normal argument expansion is done; in non-POSIX mode, field splitting, file globbing, brace expansion, and (normal) tilde expansion are turned off, while assignment tilde expansion is turned on.
• Signal specification. In POSIX mode, signals can be specified as digits, only if signal numbers match POSIX values (i.e. HUP=1, INT=2, QUIT=3, ABRT=6, KILL=9, ALRM=14, and TERM=15); in non-POSIX mode, signals can always be digits.
• Alias expansion. In POSIX mode, alias expansion is only carried out when reading command words; in non-POSIX mode, alias expansion is carried out on any word following an alias that ended in a space. For example, the following for loop uses parameter ‘i’ in POSIX mode and ‘j’ in non-POSIX mode:

  alias a='for ' i='j'
  a i in 1 2; do echo i=$i j=$j; done
  

• test. In POSIX mode, the expression ‘-t’ (preceded by some number of ‘\&!’ arguments) is always true as it is a non-zero length string; in non-POSIX mode, it tests if file descriptor 1 is a tty(4) (i.e. the fd argument to the -t test may be left out and defaults to 1).

Strict Bourne shell mode

• The parameter $_ is not set to:
  • the expanded alias' full program path after entering commands that are tracked aliases
  • the last argument on the command line after entering external commands
  • the file that changed when MAILPATH is set to monitor a mailbox
• File descriptors are left untouched when executing exec with no arguments.
• Backslash-escaped special characters are not substituted in PS1.
• Sequences of ‘’((...)) are not interpreted as arithmetic expressions.

Command execution

\&.file[arg]...

Execute the commands in file in the current environment. The file is searched for in the directories of PATH. If arguments are given, the positional parameters may be used to access them while file is being executed. If no arguments are given, the positional parameters are those of the environment the command is used in.

\&:[]...

The null command. Exit status is set to zero.

.Oo Fl d \*(Ba t Oo Fl r Oc \*(Ba -+-xOc [-p] [-+] .Oo Ar name [] ...Oc Without arguments, alias lists all aliases. For any name without a value, the existing alias is listed. Any name with a value defines an alias (see above).

When listing aliases, one of two formats is used. Normally, aliases are listed as name, where value is quoted. If options were preceded with "+", or a lone "+" is given on the command line, only name is printed.

The -d option causes directory aliases, which are used in tilde expansion, to be listed or set (see above).

If the -p option is used, each alias is prefixed with the string “alias\ \&”.

The -t option indicates that tracked aliases are to be listed/set (values specified on the command line are ignored for tracked aliases). The -r option indicates that all tracked aliases are to be reset.

The -x option sets (+xclears) the export attribute of an alias, or, if no names are given, lists the aliases with the export attribute (exporting an alias has no effect).

bg[job]...

Resume the specified stopped job(s) in the background. If no jobs are specified, %+ is assumed. See below for more information.

bind[-l]

The current bindings are listed. If the -l flag is given, bind instead lists the names of the functions to which keys may be bound. See for more information.

string ...

string ... The specified editing command is bound to the given string, which should consist of a control character optionally preceded by one of the two prefix characters. Future input of the string will cause the editing command to be immediately invoked. If the -m flag is given, the specified input string will afterwards be immediately replaced by the given substitute string, which may contain editing commands.

Control characters may be written using caret notation i.e. ^X represents Control-X. Note that although only two prefix characters (usually ESC and ^X) are supported, some multi-character sequences can be supported.

The following default bindings show how the arrow keys on an ANSI terminal or xterm are bound (of course some escape sequences won't work out quite this nicely):

bind '^[['=prefix-2
bind '^XA'=up-history
bind '^XB'=down-history
bind '^XC'=forward-char
bind '^XD'=backward-char

break[level]

Exit the level inner-most for, select, until, or while loop. level defaults to 1.

builtincommand[arg]...

Execute the built-in command command.

cd [-LP] [dir] Set the working directory to dir. If the parameter CDPATH is set, it lists the search path for the directory containing dir. A NULL path means the current directory. If dir is found in any component of the CDPATH search path other than the NULL path, the name of the new working directory will be written to standard output. If dir is missing, the home directory HOME is used. If dir is "-", the previous working directory is used (see the OLDPWD parameter).

If the -L option (logical path) is used or if the physical option isn't set (see the set command below), references to ‘’.. in dir are relative to the path used to get to the directory. If the -P option (physical path) is used or if the physical option is set, ‘’.. is relative to the filesystem directory tree. The PWD and OLDPWD parameters are updated to reflect the current and old working directory, respectively.

cd [-LP] oldnew The string new is substituted for old in the current directory, and the shell attempts to change to the new directory.

command [-pVv] cmd [arg]... If neither the -v nor -V option is given, cmd is executed exactly as if command had not been specified, with two exceptions: firstly, cmd cannot be a shell function; and secondly, special built-in commands lose their specialness (i.e. redirection and utility errors do not cause the shell to exit, and command assignments are not permanent).

If the -p option is given, a default search path is used instead of the current value of PATH (the actual value of the default path is system dependent: on POSIX-ish systems, it is the value returned by getconfCS_PATH).

If the -v option is given, instead of executing cmd, information about what would be executed is given (and the same is done for arg...). For special and regular built-in commands and functions, their names are simply printed; for aliases, a command that defines them is printed; and for commands found by searching the PATH parameter, the full path of the command is printed. If no command is found (i.e. the path search fails), nothing is printed and command exits with a non-zero status. The -V option is like the -v option, except it is more verbose.

continue[level]

Jumps to the beginning of the level inner-most for, select, until, or while loop. level defaults to 1.

echo [-Een] [arg]... Prints its arguments (separated by spaces) followed by a newline, to the standard output. The newline is suppressed if any of the arguments contain the backslash sequence "\ec". See the print command below for a list of other backslash sequences that are recognized.

The options are provided for compatibility with BSD shell scripts. The -n option suppresses the trailing newline, -e enables backslash interpretation (a no-op, since this is normally done), and -E suppresses backslash interpretation. If the posix option is set, only the first argument is treated as an option, and only if it is exactly “-n”.

evalcommand...

The arguments are concatenated (with spaces between them) to form a single string which the shell then parses and executes in the current environment.

exec [command[arg]]... The command is executed without forking, replacing the shell process.

If no command is given except for I/O redirection, the I/O redirection is permanent and the shell is not replaced. Any file descriptors greater than 2 which are opened or dup(2/Ns) in this way are not made available to other executed commands (i.e. commands that are not built-in to the shell). Note that the Bourne shell differs here; it does pass these file descriptors on.

exit[status]

The shell exits with the specified exit status. If status is not specified, the exit status is the current value of the $?\& parameter.

export [-p] [parameter] Sets the export attribute of the named parameters. Exported parameters are passed in the environment to executed commands. If values are specified, the named parameters are also assigned.

If no parameters are specified, the names of all parameters with the export attribute are printed one per line, unless the -p option is used, in which case export commands defining all exported parameters, including their values, are printed.

false

A command that exits with a non-zero status.

fc .Oo Fl e Ar editor \*(Ba -l [-n Oc] [-r] [first[last]] first and last select commands from the history. Commands can be selected by history number or a string specifying the most recent command starting with that string. The -l option lists the command on standard output, and -n inhibits the default command numbers. The -r option reverses the order of the list. Without -l, the selected commands are edited by the editor specified with the -e option, or if no -e is specified, the editor specified by the FCEDIT parameter (if this parameter is not set, /bin/ed is used), and then executed by the shell.

fc --e- \*(Ba -s [-g] [old] [prefix] Re-execute the selected command (the previous command by default) after performing the optional substitution of old with new. If -g is specified, all occurrences of old are replaced with new. The meaning of --e- and -s is identical: re-execute the selected command without invoking an editor. This command is usually accessed with the predefined aliasr='fc -e -'.

fg[job]...

Resume the specified job(s) in the foreground. If no jobs are specified, %+ is assumed. See below for more information.

getopts optstringname [arg]... Used by shell procedures to parse the specified arguments (or positional parameters, if no arguments are given) and to check for legal options. optstring contains the option letters that getopts is to recognize. If a letter is followed by a colon, the option is expected to have an argument. Options that do not take arguments may be grouped in a single argument. If an option takes an argument and the option character is not the last character of the argument it is found in, the remainder of the argument is taken to be the option's argument; otherwise, the next argument is the option's argument.

Each time getopts is invoked, it places the next option in the shell parameter name and the index of the argument to be processed by the next call to getopts in the shell parameter OPTIND. If the option was introduced with a "+", the option placed in name is prefixed with a "+". When an option requires an argument, getopts places it in the shell parameter OPTARG.

When an illegal option or a missing option argument is encountered, a question mark or a colon is placed in name (indicating an illegal option or missing argument, respectively) and OPTARG is set to the option character that caused the problem. Furthermore, if optstring does not begin with a colon, a question mark is placed in name, OPTARG is unset, and an error message is printed to standard error.

When the end of the options is encountered, getopts exits with a non-zero exit status. Options end at the first (non-option argument) argument that does not start with a "-", or when a "--" argument is encountered.

Option parsing can be reset by setting OPTIND to 1 (this is done automatically whenever the shell or a shell procedure is invoked).

Warning: Changing the value of the shell parameter OPTIND to a value other than 1, or parsing different sets of arguments without resetting OPTIND, may lead to unexpected results.

hash [-r] [name]... Without arguments, any hashed executable command pathnames are listed. The -r option causes all hashed commands to be removed from the hash table. Each name is searched as if it were a command name and added to the hash table if it is an executable command.

jobs [-lnp] [job]... Display information about the specified job(s); if no jobs are specified, all jobs are displayed. The -n option causes information to be displayed only for jobs that have changed state since the last notification. If the -l option is used, the process ID of each process in a job is also listed. The -p option causes only the process group of each job to be printed. See below for the format of job and the displayed job.

kill .Oo Fl s Ar signame \*(Ba - - { job\*(Ba pid \*(Ba pgrp } ... Send the specified signal to the specified jobs, process IDs, or process groups. If no signal is specified, the TERM signal is sent. If a job is specified, the signal is sent to the job's process group. See below for the format of job.

kill -l [exit-status]... Print the signal name corresponding to exit-status. If no arguments are specified, a list of all the signals, their numbers, and a short description of them are printed.

let[expression]...

Each expression is evaluated (see above). If all expressions are successfully evaluated, the exit status is 0 (1) if the last expression evaluated to non-zero (zero). If an error occurs during the parsing or evaluation of an expression, the exit status is greater than 1. Since expressions may need to be quoted, (( expr)) is syntactic sugar for let \&" .

mknod [-m mode] name [-b| -c] majorminor

mknod [-m mode] name -p Create a device special file. The file type may be -b (block type device), -c (character type device), or -p (named pipe). The file created may be modified according to its mode (via the -m option), major (major device number), and minor (minor device number).

See mknod(8) for further information.

print .Oo Fl nprsu Ns Oo Ar n Oc \*(Ba -R [-en Oc] [argument]... print prints its arguments on the standard output, separated by spaces and terminated with a newline. The -n option suppresses the newline. By default, certain C escapes are translated. These include "\eb", "\ef", "\en", "\er", "\et", "\ev", and "\e0###" ( "#" is an octal digit, of which there may be 0 to 3 ). "\ec" is equivalent to using the -n option. "\e" expansion may be inhibited with the -r option. The -s option prints to the history file instead of standard output; the -u option prints to file descriptor n ( n defaults to 1 if omitted ); and the -p option prints to the co-process (see above).

The -R option is used to emulate, to some degree, the BSD echo(1) command, which does not process "\e" sequences unless the -e option is given. As above, the -n option suppresses the trailing newline.

pwd[-LP]

Print the present working directory. If the -L option is used or if the physical option isn't set (see the set command below), the logical path is printed (i.e. the path used to cd to the current directory). If the -P option (physical path) is used or if the physical option is set, the path determined from the filesystem (by following ‘’.. directories to the root directory) is printed.

read [-prsu ] [parameter]... Reads a line of input from the standard input, separates the line into fields using the IFS parameter (see above), and assigns each field to the specified parameters. If there are more parameters than fields, the extra parameters are set to NULL, or alternatively, if there are more fields than parameters, the last parameter is assigned the remaining fields (inclusive of any separating spaces). If no parameters are specified, the REPLY parameter is used. If the input line ends in a backslash and the -r option was not used, the backslash and the newline are stripped and more input is read. If no input is read, read exits with a non-zero status.

The first parameter may have a question mark and a string appended to it, in which case the string is used as a prompt (printed to standard error before any input is read) if the input is a tty(4) (e.g.\& readnfoo?'number of foos: ').

The -u and -p options cause input to be read from file descriptor n .Pf ( Ar n defaults to 0 if omitted) or the current co-process (see above for comments on this), respectively. If the -s option is used, input is saved to the history file.

readonly [-p] .Oo Ar parameter [] ...Oc Sets the read-only attribute of the named parameters. If values are given, parameters are set to them before setting the attribute. Once a parameter is made read-only, it cannot be unset and its value cannot be changed.

If no parameters are specified, the names of all parameters with the read-only attribute are printed one per line, unless the -p option is used, in which case readonly commands defining all read-only parameters, including their values, are printed.

return[status]

Returns from a function or .\& script, with exit status status. If no status is given, the exit status of the last executed command is used. If used outside of a function or .\& script, it has the same effect as exit. Note that pdksh treats both profile and ENV files as .\& scripts, while the original Korn shell only treats profiles as .\& scripts.

set[+-abCefhkmnpsuvXx] [+-ooption] [+-Aname] [--] [arg]... The set command can be used to set (-) or clear (+) shell options, set the positional parameters, or set an array parameter. Options can be changed using the -+-ooption syntax, where option is the long name of an option, or using the -+- syntax, where letter is the option's single letter name (not all options have a single letter name). The following table lists both option letters (if they exist) and long names along with a description of what the option does:

-A name

Sets the elements of the array parameter name to arg... If -A is used, the array is reset (i.e. emptied) first; if +A is used, the first N elements are set (where N is the number of arguments); the rest are left untouched.

-a \*(Ba allexport

All new parameters are created with the export attribute.

-b \*(Ba notify

Print job notification messages asynchronously, instead of just before the prompt. Only used if job control is enabled (-m).

-C \*(Ba noclobber

Prevent \*(Gt redirection from overwriting existing files. Instead, \*(Gt\*(Ba must be used to force an overwrite.

-e \*(Ba errexit

Exit (after executing the ERR trap) as soon as an error occurs or a command fails (i.e. exits with a non-zero status). This does not apply to commands whose exit status is explicitly tested by a shell construct such as if, until, while, &&, ||, or !\& statements.

-f \*(Ba noglob

Do not expand file name patterns.

-h \*(Ba trackall

Create tracked aliases for all executed commands (see above). Enabled by default for non-interactive shells.

-k \*(Ba keyword

Parameter assignments are recognized anywhere in a command.

-m \*(Ba monitor

Enable job control (default for interactive shells).

-n \*(Ba noexec

Do not execute any commands. Useful for checking the syntax of scripts (ignored if interactive).

-p \*(Ba privileged

The shell is a privileged shell. It is set automatically if, when the shell starts, the real UID or GID does not match the effective UID (EUID) or GID (EGID), respectively. See above for a description of what this means.

-s \*(Ba stdin

If used when the shell is invoked, commands are read from standard input. Set automatically if the shell is invoked with no arguments.

When -s is used with the set command it causes the specified arguments to be sorted before assigning them to the positional parameters (or to array name, if -A is used).

-u \*(Ba nounset

Referencing of an unset parameter is treated as an error, unless one of the "-", "+", or "=" modifiers is used.

-v \*(Ba verbose

Write shell input to standard error as it is read.

-X \*(Ba markdirs

Mark directories with a trailing "/" during file name generation.

-x \*(Ba xtrace

Print commands and parameter assignments when they are executed, preceded by the value of PS4.

bgnice

Background jobs are run with lower priority.

braceexpand

Enable brace expansion (a.k.a. alternation).

csh-history

Enables a subset of csh(1/Ns) history editing using the "!\&" character.

emacs

Enable BRL emacs-like command-line editing (interactive shells only); see

emacs-usemeta

In emacs command-line editing, use the 8th bit as meta (^[) prefix. This is the default.

gmacs

Enable gmacs-like command-line editing (interactive shells only). Currently identical to emacs editing except that transpose (^T) acts slightly differently.

ignoreeof

The shell will not (easily) exit when end-of-file is read; exit must be used. To avoid infinite loops, the shell will exit if EOF is read 13 times in a row.

interactive

The shell is an interactive shell. This option can only be used when the shell is invoked. See above for a description of what this means.

login

The shell is a login shell. This option can only be used when the shell is invoked. See above for a description of what this means.

nohup

Do not kill running jobs with a SIGHUP signal when a login shell exits. Currently set by default, but this will change in the future to be compatible with the original Korn shell (which doesn't have this option, but does send the SIGHUP signal).

nolog

No effect. In the original Korn shell, this prevents function definitions from being stored in the history file.

physical

Causes the cd and pwd commands to use “physical” (i.e. the filesystem's) ‘’.. directories instead of “logical” directories (i.e. the shell handles ‘....’, which allows the user to be oblivious of symbolic links to directories). Clear by default. Note that setting this option does not affect the current value of the PWD parameter; only the cd command changes PWD. See the cd and pwd commands above for more details.

posix

Enable POSIX mode. See above.

restricted

The shell is a restricted shell. This option can only be used when the shell is invoked. See above for a description of what this means.

sh

Enable strict Bourne shell mode (see above).

vi

Enable vi(1/Ns) command-line editing (interactive shells only).

vi-esccomplete

In vi command-line editing, do command and file name completion when escape (^[) is entered in command mode.

vi-show8

Prefix characters with the eighth bit set with ‘M-’. If this option is not set, characters in the range 128\-160 are printed as is, which may cause problems.

vi-tabcomplete

In vi command-line editing, do command and file name completion when tab (^I) is entered in insert mode. This is the default.

viraw

No effect. In the original Korn shell, unless viraw was set, the vi command-line mode would let the tty(4) driver do the work until ESC (^[) was entered. pdksh is always in viraw mode.

These options can also be used upon invocation of the shell. The current set of options (with single letter names) can be found in the parameter ‘$-’. set-o with no option name will list all the options and whether each is on or off; set+o will print the long names of all options that are currently on.

Remaining arguments, if any, are positional parameters and are assigned, in order, to the positional parameters (i.e. $1, $2, etc.). If options end with "--" and there are no remaining arguments, all positional parameters are cleared. If no options or arguments are given, the values of all names are printed. For unknown historical reasons, a lone "-" option is treated specially \- it clears both the -x and -v options.

shift[number]

The positional parameters number, number, etc. are renamed to ֫’, ֬’, etc. number defaults to 1.

testexpression

\&[expression\&]

test evaluates the expression and returns zero status if true, 1 if false, or greater than 1 if there was an error. It is normally used as the condition command of if and while statements. Symbolic links are followed for all file expressions except -h and -L.

The following basic expressions are available:

-a file

file exists.

-b file

file is a block special device.

-c file

file is a character special device.

-d file

file is a directory.

-e file

file exists.

-f file

file is a regular file.

-G file

file group is the shell's effective group ID.

-g file

file mode has the setgid bit set.

-h file

file is a symbolic link.

-k file

file mode has the sticky(8) bit set.

-L file

file is a symbolic link.

-O file

file owner is the shell's effective user ID.

-o option

Shell option is set (see the set command above for a list of options). As a non-standard extension, if the option starts with a "\&!", the test is negated; the test always fails if option doesn't exist (so [ -o foo -o -o !foo ] returns true if and only if option foo exists).

-p file

file is a named pipe.

-r file

file exists and is readable.

-S file

file is a unix(4/Ns) socket.

-s file

file is not empty.

-t [fd]

File descriptor fd is a tty(4) device. If the posix option is not set, fd may be left out, in which case it is taken to be 1 (the behaviour differs due to the special POSIX rules described above).

-u file

file mode has the setuid bit set.

-w file

file exists and is writable.

-x file

file exists and is executable.

file1-nt file2

file1 is newer than file2 or file1 exists and file2 does not.

file1-ot file2

file1 is older than file2 or file2 exists and file1 does not.

file1-ef file2

file1 is the same file as file2.

string

string has non-zero length.

-n string

string is not empty.

-z string

string is empty.

string= string

Strings are equal.

string== string

Strings are equal.

string!= string

Strings are not equal.

number-eq number

Numbers compare equal.

number-ne number

Numbers compare not equal.

number-ge number

Numbers compare greater than or equal.

number-gt number

Numbers compare greater than.

number-le number

Numbers compare less than or equal.

number-\< number

Numbers compare less than.

The above basic expressions, in which unary operators have precedence over binary operators, may be combined with the following operators (listed in increasing order of precedence):

expr -o expr		Logical OR.
expr -a expr		Logical AND.
! expr			Logical NOT.
( expr )		Grouping.

On operating systems not supporting /dev/fd/ devices (where n is a file descriptor number), the test command will attempt to fake it for all tests that operate on files (except the -e test). For example, [ -w /dev/fd/2 ] tests if file descriptor 2 is writable.

Note that some special rules are applied (courtesy of POSIX) if the number of arguments to test or \&[... \&] is less than five: if leading "\&!" arguments can be stripped such that only one argument remains then a string length test is performed (again, even if the argument is a unary operator); if leading "\&!" arguments can be stripped such that three arguments remain and the second argument is a binary operator, then the binary operation is performed (even if the first argument is a unary operator, including an unstripped "\&!")).

Note: A common mistake is to use “if \&[ $foo = bar \&]” which fails if parameter “foo” is NULL or unset, if it has embedded spaces (i.e.\& IFS characters), or if it is a unary operator like ‘\&!’ or ‘-n’. Use tests like “if \&[ \&"X$foo\&" = Xbar \&]” instead.

time [-p] [pipeline] If a pipeline is given, the times used to execute the pipeline are reported. If no pipeline is given, then the user and system time used by the shell itself, and all the commands it has run since it was started, are reported. The times reported are the real time (elapsed time from start to finish), the user CPU time (time spent running in user mode), and the system CPU time (time spent running in kernel mode). Times are reported to standard error; the format of the output is:

     "0m0.00s real 0m0.00s user 0m0.00s system"

If the -p option is given the output is slightly longer:

real     0.00
user     0.00
sys      0.00

It is an error to specify the -p option unless pipeline is a simple command.

Simple redirections of standard error do not affect the output of the time command:

     $ time sleep 1 2\*(Gt afile      $ { time sleep 1; } 2\*(Gt afile

Times for the first command do not go to “afile”, but those of the second command do.

times

Print the accumulated user and system times used both by the shell and by processes that the shell started which have exited. The format of the output is:

0m0.00s 0m0.00s
0m0.00s 0m0.00s

trap[handlersignal]...

Sets a trap handler that is to be executed when any of the specified signals are received. handler is either a NULL string, indicating the signals are to be ignored, a minus sign (‘-’), indicating that the default action is to be taken for the signals (see signal(3/)), or a string containing shell commands to be evaluated and executed at the first opportunity (i.e. when the current command completes, or before printing the next PS1 prompt) after receipt of one of the signals. signal is the name of a signal (e.g.\& PIPE or ALRM) or the number of the signal (see the kill-l command above).

There are two special signals: EXIT (also known as 0), which is executed when the shell is about to exit, and ERR, which is executed after an error occurs (an error is something that would cause the shell to exit if the -e or errexit option were set \- see the set command above). EXIT handlers are executed in the environment of the last executed command. Note that for non-interactive shells, the trap handler cannot be changed for signals that were ignored when the shell started.

With no arguments, trap lists, as a series of trap commands, the current state of the traps that have been set since the shell started. Note that the output of trap cannot be usefully piped to another process (an artifact of the fact that traps are cleared when subprocesses are created).

The original Korn shell's DEBUG trap and the handling of ERR and EXIT traps in functions are not yet implemented.

true

A command that exits with a zero value.

typeset .Oo Op Ic +-lprtUux [-L ] [-R ] [-Z ] [-i ] \*(Ba -f [-tux Oc] .Oo Ar name [] ...Oc Display or set parameter attributes. With no name arguments, parameter attributes are displayed; if no options are used, the current attributes of all parameters are printed as typeset commands; if an option is given (or "-" with no option letter), all parameters and their values with the specified attributes are printed; if options are introduced with "+", parameter values are not printed.

If name arguments are given, the attributes of the named parameters are set (-) or cleared (+). Values for parameters may optionally be specified. If typeset is used inside a function, any newly created parameters are local to the function.

When -f is used, typeset operates on the attributes of functions. As with parameters, if no name arguments are given, functions are listed with their values (i.e. definitions) unless options are introduced with "+", in which case only the function names are reported.

-f

Function mode. Display or set functions and their attributes, instead of parameters.

-i

Integer attribute. n specifies the base to use when displaying the integer (if not specified, the base given in the first assignment is used). Parameters with this attribute may be assigned values containing arithmetic expressions.

-L

Left justify attribute. n specifies the field width. If n is not specified, the current width of a parameter (or the width of its first assigned value) is used. Leading whitespace (and zeros, if used with the -Z option) is stripped. If necessary, values are either truncated or space padded to fit the field width.

-l

Lower case attribute. All upper case characters in values are converted to lower case. (In the original Korn shell, this parameter meant “long integer” when used with the -i option.)

-p

Print complete typeset commands that can be used to re-create the attributes (but not the values) of parameters. This is the default action (option exists for ksh93 compatibility).

-R

Right justify attribute. n specifies the field width. If n is not specified, the current width of a parameter (or the width of its first assigned value) is used. Trailing whitespace is stripped. If necessary, values are either stripped of leading characters or space padded to make them fit the field width.

-r

Read-only attribute. Parameters with this attribute may not be assigned to or unset. Once this attribute is set, it cannot be turned off.

-t

Tag attribute. Has no meaning to the shell; provided for application use.

For functions, -t is the trace attribute. When functions with the trace attribute are executed, the xtrace (-x) shell option is temporarily turned on.

-U

Unsigned integer attribute. Integers are printed as unsigned values (only useful when combined with the -i option). This option is not in the original Korn shell.

-u

Upper case attribute. All lower case characters in values are converted to upper case. (In the original Korn shell, this parameter meant “unsigned integer” when used with the -i option, which meant upper case letters would never be used for bases greater than 10. See the -U option.)

For functions, -u is the undefined attribute. See above for the implications of this.

-x

Export attribute. Parameters (or functions) are placed in the environment of any executed commands. Exported functions are not yet implemented.

-Z

Zero fill attribute. If not combined with -L, this is the same as -R, except zero padding is used instead of space padding.

ulimit [-acdfHlmnpSst [value]] ... Display or set process limits. If no options are used, the file size limit (-f) is assumed. value, if specified, may be either an arithmetic expression starting with a number or the word “unlimited”. The limits affect the shell and any processes created by the shell after a limit is imposed; limits may not be increased once they are set.

-a

Display all limits; unless -H is used, soft limits are displayed.

-c n

Impose a size limit of n blocks on the size of core dumps.

-d n

Impose a size limit of n kilobytes on the size of the data area.

-f n

Impose a size limit of n blocks on files written by the shell and its child processes (files of any size may be read).

-H

Set the hard limit only (the default is to set both hard and soft limits).

-l n

Impose a limit of n kilobytes on the amount of locked (wired) physical memory.

-m n

Impose a limit of n kilobytes on the amount of physical memory used.

-n n

Impose a limit of n file descriptors that can be open at once.

-p n

Impose a limit of n processes that can be run by the user at any one time.

-S

Set the soft limit only (the default is to set both hard and soft limits).

-s n

Impose a size limit of n kilobytes on the size of the stack area.

-t n

Impose a time limit of n CPU seconds spent in user mode to be used by each process.

As far as ulimit is concerned, a block is 512 bytes.

umask [-S] [mask] Display or set the file permission creation mask, or umask (see umask(2/)). If the -S option is used, the mask displayed or set is symbolic; otherwise, it is an octal number.

Symbolic masks are like those used by chmod(1). When used, they describe what permissions may be made available (as opposed to octal masks in which a set bit means the corresponding bit is to be cleared). For example, “ug=rwx,o=” sets the mask so files will not be readable, writable, or executable by “others”, and is equivalent (on most systems) to the octal mask “007”.

unalias [-adt] [name]... The aliases for the given names are removed. If the -a option is used, all aliases are removed. If the -t or -d options are used, the indicated operations are carried out on tracked or directory aliases, respectively.

unset [-fv] parameter... Unset the named parameters ( -v, the default ) or functions (-f). The exit status is non-zero if any of the parameters were already unset, zero otherwise.

wait[job]...

Wait for the specified job(s) to finish. The exit status of wait is that of the last specified job; if the last job is killed by a signal, the exit status is 128 + the number of the signal (see kill-l exit-status above); if the last specified job can't be found (because it never existed, or had already finished), the exit status of wait is 127. See below for the format of job. wait will return if a signal for which a trap has been set is received, or if a SIGHUP, SIGINT, or SIGQUIT signal is received.

If no jobs are specified, wait waits for all currently running jobs (if any) to finish and exits with a zero status. If job monitoring is enabled, the completion status of jobs is printed (this is not the case when jobs are explicitly specified).

whence [-pv] [name]... For each name, the type of command is listed (reserved word, built-in, alias, function, tracked alias, or executable). If the -p option is used, a path search is performed even if name is a reserved word, alias, etc. Without the -v option, whence is similar to command-v except that whence will find reserved words and won't print aliases as alias commands. With the -v option, whence is the same as command-V. Note that for whence, the -p option does not affect the search path used, as it does for command. If the type of one or more of the names could not be determined, the exit status is non-zero.

Job control

%+ \*(Ba %% \*(Ba %

The most recently stopped job, or, if there are no stopped jobs, the oldest running job.

%-

The job that would be the %+ job if the latter did not exist.

%

The job with job number n.

%?

The job with its command containing the string string (an error occurs if multiple jobs are matched).

%

The job with its command starting with the string string (an error occurs if multiple jobs are matched).

number

is the job number of the job;

flag

is the "+" or "-" character if the job is the %+ or %- job, respectively, or space if it is neither;

status

indicates the current state of the job and can be:

Done [number]

The job exited. number is the exit status of the job, which is omitted if the status is zero.

Running

The job has neither stopped nor exited (note that running does not necessarily mean consuming CPU time \- the process could be blocked waiting for some event).

Stopped [signal]

The job was stopped by the indicated signal (if no signal is given, the job was stopped by SIGTSTP)).

signal-description[“core dumped”]

The job was killed by a signal (e.g. memory fault, hangup); use kill-l for a list of signal descriptions. The “core dumped” message indicates the process created a core file.

command

is the command that created the process. If there are multiple processes in the job, each process will have a line showing its command and possibly its status, if it is different from the status of the previous process.

Interactive input line editing

Emacs editing mode

abort: ^C, ^G

Useful as a response to a request for a search-history pattern in order to abort the search.

auto-insert: [n]

Simply causes the character to appear as literal input. Most ordinary characters are bound to this.

[n] ^B , ^XD Moves the cursor backward n characters.

[n] ^[b Moves the cursor backward to the beginning of the word; words consist of alphanumerics, underscore (‘_’), and dollar sign (‘$’) characters.

beginning-of-history: ^[\*(Lt

Moves to the beginning of the history.

beginning-of-line: ^A

Moves the cursor to the beginning of the edited input line.

[n] ^[C , ^[c Uppercase the first character in the next n words, leaving the cursor past the end of the last word.

comment: ^[#

If the current line does not begin with a comment character, one is added at the beginning of the line and the line is entered (as if return had been pressed); otherwise, the existing comment characters are removed and the cursor is placed at the beginning of the line.

complete: ^[^[

Automatically completes as much as is unique of the command name or the file name containing the cursor. If the entire remaining command or file name is unique, a space is printed after its completion, unless it is a directory name in which case "/" is appended. If there is no command or file name with the current partial word as its prefix, a bell character is output (usually causing a beep to be sounded).

complete-command: ^X^[

Automatically completes as much as is unique of the command name having the partial word up to the cursor as its prefix, as in the complete command above.

complete-file: ^[^X

Automatically completes as much as is unique of the file name having the partial word up to the cursor as its prefix, as in the complete command described above.

complete-list: ^I, ^[=

Complete as much as is possible of the current word, and list the possible completions for it. If only one completion is possible, match as in the complete command above.

[n] ERASE , ^? , ^H Deletes n characters before the cursor.

delete-char-forward: [n]

Deletes n characters after the cursor.

[n] ERASE , ^[^? , ^[^H , ^[h Deletes n words before the cursor.

[n] ^[d Deletes characters after the cursor up to the end of n words.

[n] ^N , ^XB Scrolls the history buffer forward n lines (later). Each input line originally starts just after the last entry in the history buffer, so down-history is not useful until either search-history or up-history has been performed.

[n] ^[L , ^[l Lowercases the next n words.

end-of-history: ^[\*(Gt

Moves to the end of the history.

end-of-line: ^E

Moves the cursor to the end of the input line.

eot: ^_

Acts as an end-of-file; this is useful because edit-mode input disables normal terminal input canonicalization.

[n] ^D Acts as eot if alone on a line; otherwise acts as delete-char-forward.

error:

Error (ring the bell).

exchange-point-and-mark: ^X^X

Places the cursor where the mark is and sets the mark to where the cursor was.

expand-file: ^[*

Appends a "*" to the current word and replaces the word with the result of performing file globbing on the word. If no files match the pattern, the bell is rung.

[n] ^F , ^XC Moves the cursor forward n characters.

[n] ^[f Moves the cursor forward to the end of the n word.

[n] ^[g Goes to history number n.

kill-line: KILL

Deletes the entire input line.

kill-region: ^W

Deletes the input between the cursor and the mark.

[n] ^K Deletes the input from the cursor to the end of the line if n is not specified; otherwise deletes characters between the cursor and column n.

list: ^[?

Prints a sorted, columnated list of command names or file names (if any) that can complete the partial word containing the cursor. Directory names have "/" appended to them.

list-command: ^X?

Prints a sorted, columnated list of command names (if any) that can complete the partial word containing the cursor.

list-file: ^X^Y

Prints a sorted, columnated list of file names (if any) that can complete the partial word containing the cursor. File type indicators are appended as described under list above.

newline: ^J , ^M

Causes the current input line to be processed by the shell. The current cursor position may be anywhere on the line.

newline-and-next: ^O

Causes the current input line to be processed by the shell, and the next line from history becomes the current line. This is only useful after an up-history or search-history.

no-op: QUIT

This does nothing.

prefix-1: ^[

Introduces a 2-character command sequence.

prefix-2: ^X , ^[[ , ^[O

Introduces a 2-character command sequence.

[n] ^[. , ^[_ The last (n) word of the previous command is inserted at the cursor.

quote: ^^

The following character is taken literally rather than as an editing command.

redraw: ^L

Reprints the prompt string and the current input line.

[n] ^[^] Search backward in the current line for the n occurrence of the next character typed.

[n] ^] Search forward in the current line for the n occurrence of the next character typed.

search-history: ^R

Enter incremental search mode. The internal history list is searched backwards for commands matching the input. An initial "^" in the search string anchors the search. The abort key will leave search mode. Other commands will be executed after leaving search mode. Successive search-history commands continue searching backward to the next previous occurrence of the pattern. The history buffer retains only a finite number of lines; the oldest are discarded as necessary.

set-mark-command: ^[

Set the mark at the cursor position.

stuff:

On systems supporting it, pushes the bound character back onto the terminal input where it may receive special processing by the terminal handler. This is useful for the BRL ^T mini-systat feature, for example.

stuff-reset:

Acts like stuff, then aborts input the same as an interrupt.

transpose-chars: ^T

If at the end of line, or if the gmacs option is set, this exchanges the two previous characters; otherwise, it exchanges the previous and current characters and moves the cursor one character to the right.

[n] ^P , ^XA Scrolls the history buffer backward n lines (earlier).

[n] ^[U , ^[u Uppercase the next n words.

quote: ^V

Synonym for ^^.

yank: ^Y

Inserts the most recently killed text string at the current cursor position.

yank-pop: ^[y

Immediately after a yank, replaces the inserted text string with the next previously killed text string.

Vi editing mode

• You start out in insert mode.
• There are file name and command completion commands: =, \e, *, ^X, ^E, ^F, and, optionally, ‹tab› and ‹esc›.
• The _ command is different (in ksh it is the last argument command; in vi(1) it goes to the start of the current line).
• The / and G commands move in the opposite direction to the j command.
• Commands which don't make sense in a single line editor are not available (e.g. screen movement commands and ex(1/Ns) colon (\&:) commands).

^E

Command and file name enumeration (see below).

^F

Command and file name completion (see below). If used twice in a row, the list of possible completions is displayed; if used a third time, the completion is undone.

^H

Erases previous character.

^J \*(Ba ^M

End of line. The current line is read, parsed, and executed by the shell.

^V

Literal next. The next character typed is not treated specially (can be used to insert the characters being described here).

^X

Command and file name expansion (see below).

‹esc›

Puts the editor in command mode (see below).

‹tab›

Optional file name and command completion (see ^F above), enabled with set-o vi-tabcomplete.

.Oo Ar n Oc Ns _ Insert a space followed by the n big-word from the last command in the history at the current position and enter insert mode; if n is not specified, the last word is inserted.

#

Insert the comment character (‘#’) at the start of the current line and return the line to the shell (equivalent to I#^J)).

.Oo Ar n Oc Ns g Like G, except if n is not specified, it goes to the most recent remembered line.

.Oo Ar n Oc Ns v Edit line n using the vi(1) editor; if n is not specified, the current line is edited. The actual command executed is fc-e ${VISUAL:-${EDITOR:-vi}} n.

* and ^X

Command or file name expansion is applied to the current big-word (with an appended "*" if the word contains no file globbing characters) \- the big-word is replaced with the resulting words. If the current big-word is the first on the line or follows one of the characters "\&;", "|", "&", "(", or "\&)", and does not contain a slash (‘/’), then command expansion is done; otherwise file name expansion is done. Command expansion will match the big-word against all aliases, functions, and built-in commands as well as any executable files found by searching the directories in the PATH parameter. File name expansion matches the big-word against the files in the current directory. After expansion, the cursor is placed just past the last word and the editor is in insert mode.

.Oo Ar n Oc Ns \e , .Oo Ar n Oc Ns ^F , .Oo Ar n Oc Ns Aq tab , and .Oo Ar n Oc Ns Aq esc Command/file name completion. Replace the current big-word with the longest unique match obtained after performing command and file name expansion. ‹tab› is only recognized if the vi-tabcomplete option is set, while ‹esc› is only recognized if the vi-esccomplete option is set (see set-o). If n is specified, the n possible completion is selected (as reported by the command/file name enumeration command).

= and ^E

Command/file name enumeration. List all the commands or files that match the current big-word.

@

Macro expansion. Execute the commands found in the alias c.

.Oo Ar n Oc Ns h and .Oo Ar n Oc Ns ^H Move left n characters.

.Oo Ar n Oc Ns l and .Oo Ar n Oc Ns Aq space Move right n characters.

0

Move to column 0.

^

Move to the first non-whitespace character.

.Oo Ar n Oc Ns \*(Ba Move to column n.

$

Move to the last character.

.Oo Ar n Oc Ns b Move back n words.

.Oo Ar n Oc Ns B Move back n big-words.

.Oo Ar n Oc Ns e Move forward to the end of the word, n times.

.Oo Ar n Oc Ns E Move forward to the end of the big-word, n times.

.Oo Ar n Oc Ns w Move forward n words.

.Oo Ar n Oc Ns W Move forward n big-words.

%

Find match. The editor looks forward for the nearest parenthesis, bracket, or brace and then moves the cursor to the matching parenthesis, bracket, or brace.

.Oo Ar n Oc Ns f Ns Ar c Move forward to the n occurrence of the character c.

.Oo Ar n Oc Ns F Ns Ar c Move backward to the n occurrence of the character c.

.Oo Ar n Oc Ns t Ns Ar c Move forward to just before the n occurrence of the character c.

.Oo Ar n Oc Ns T Ns Ar c Move backward to just before the n occurrence of the character c.

.Oo Ar n Oc Ns \&; Repeats the last f, F , t, or T command.

.Oo Ar n Oc Ns \&, Repeats the last f, F , t, or T command, but moves in the opposite direction.

.Oo Ar n Oc Ns j , .Oo Ar n Oc Ns + , and .Oo Ar n Oc Ns ^N Move to the n next line in the history.

.Oo Ar n Oc Ns k , .Oo Ar n Oc Ns - , and .Oo Ar n Oc Ns ^P Move to the n previous line in the history.

.Oo Ar n Oc Ns G Move to line n in the history; if n is not specified, the number of the first remembered line is used.

.Oo Ar n Oc Ns g Like G, except if n is not specified, it goes to the most recent remembered line.

.Oo Ar n Oc Ns / Ns Ar string Search backward through the history for the n line containing string; if string starts with "^", the remainder of the string must appear at the start of the history line for it to match.

.Oo Ar n Oc Ns \&? Ns Ar string Same as /, except it searches forward through the history.

.Oo Ar n Oc Ns n Search for the n occurrence of the last search string; the direction of the search is the same as the last search.

.Oo Ar n Oc Ns N Search for the n occurrence of the last search string; the direction of the search is the opposite of the last search.

.Oo Ar n Oc Ns a Append text n times; goes into insert mode just after the current position. The append is only replicated if command mode is re-entered i.e.\& ‹esc› is used.

.Oo Ar n Oc Ns A Same as a, except it appends at the end of the line.

.Oo Ar n Oc Ns i Insert text n times; goes into insert mode at the current position. The insertion is only replicated if command mode is re-entered i.e.\& ‹esc› is used.

.Oo Ar n Oc Ns I Same as i, except the insertion is done just before the first non-blank character.

.Oo Ar n Oc Ns s Substitute the next n characters (i.e. delete the characters and go into insert mode).

S

Substitute whole line. All characters from the first non-blank character to the end of the line are deleted and insert mode is entered.

.Oo Ar n Oc Ns c Ns Ar move-cmd Change from the current position to the position resulting from nmove-cmd (i.e. delete the indicated region and go into insert mode); if move-cmd is c, the line starting from the first non-blank character is changed.

C

Change from the current position to the end of the line (i.e. delete to the end of the line and go into insert mode).

.Oo Ar n Oc Ns x Delete the next n characters.

.Oo Ar n Oc Ns X Delete the previous n characters.

D

Delete to the end of the line.

.Oo Ar n Oc Ns d Ns Ar move-cmd Delete from the current position to the position resulting from nmove-cmd ; move-cmd is a movement command (see above) or d, in which case the current line is deleted.

.Oo Ar n Oc Ns r Ns Ar c Replace the next n characters with the character c.

.Oo Ar n Oc Ns R Replace. Enter insert mode but overwrite existing characters instead of inserting before existing characters. The replacement is repeated n times.

.Oo Ar n Oc Ns ~ Change the case of the next n characters.

.Oo Ar n Oc Ns y Ns Ar move-cmd Yank from the current position to the position resulting from nmove-cmd into the yank buffer; if move-cmd is y, the whole line is yanked.

Y

Yank from the current position to the end of the line.

.Oo Ar n Oc Ns p Paste the contents of the yank buffer just after the current position, n times.

.Oo Ar n Oc Ns P Same as p, except the buffer is pasted at the current position.

^J and ^M

The current line is read, parsed, and executed by the shell.

^L and ^R

Redraw the current line.

.Oo Ar n Oc Ns \&. Redo the last edit command n times.

u

Undo the last edit command.

U

Undo all changes that have been made to the current line.

intrand quit

The interrupt and quit terminal characters cause the current line to be deleted and a new prompt to be printed.

FILES

~/.profile

User's login profile.

/etc/ksh.kshrc

Global configuration file. Not sourced by default.

/etc/profile

System login profile.

/etc/shells

Shell database.

/etc/suid_profile

Privileged shell profile.

SEE ALSO

VERSION

AUTHORS