NETSTAT(1) AerieBSD 1.0 Refernce Manual NETSTAT(1)

NAME

netstat — show network status

SYNOPSIS

netstat [-Aan] [-f address_family] [-M core] [-N system] netstat .Bk -words [-bdFghilmnqrstu] [-f address_family] [-M core] [-N system] [-T tableid] .Ek netstat [-bdn] [-I interface] [-M core] [-N system] [-w wait] netstat [-M core] [-N system] -P pcbaddr netstat [-s] [-M core] [-N system] [-p protocol] netstat [-a] [-f address_family] [-i | I interface] netstat [-W interface]

DESCRIPTION

The netstat command symbolically displays the contents of various network-related data structures. There are a number of output formats, depending on the options for the information presented.

The first form of the command displays a list of active sockets for each protocol. The second form presents the contents of one of the other network data structures according to the option selected. Using the third form, with a wait interval specified, netstat will continuously display the information regarding packet traffic on the configured network interfaces. The fourth form displays statistics about the protocol control block (PCB). The fifth form displays statistics about the named protocol. The sixth form displays per interface statistics for the specified address family. The final form displays per interface statistics for the specified wireless (802.11) device.

The options are as follows:
-A
With the default display, show the address of any protocol control blocks associated with sockets; used for debugging, e.g. with the -P flag.
-a
With the default display, show the state of all sockets; normally sockets used by server processes are not shown. With the interface display (options -I or -i), show multicast addresses.
-b
With the interface display (options -I or -i), show bytes in and out, instead of packet statistics.
-d
With either the interface display (options -I or -i) or an interval (option -w), show the number of dropped packets.
-F
When showing routes, only show routes whose gateway are in the same address family as the destination.
-f address_family
Limit statistics or address control block reports to those of the specified address_family.

The following address families are recognized:

Address Family Constant Description
inet AF_INETIP Version 4
inet6 AF_INET6IP Version 6
atalk AF_APPLETALKAppleTalk
encap PF_KEYIPsec
local AF_LOCALLocal to Host (i.e., pipes)
unix AF_UNIXLocal to Host (i.e., pipes)

-g
Show information related to multicast (group address) routing. By default, show the IP multicast virtual-interface and routing tables. If the -s option is also present, show multicast routing statistics.
-h
When used with -b in combination with either -i or -I, output “human-readable” byte counts.
-I interface
Show information about the specified interface; used with a wait interval as described below.

If the -a option is also present, multicast addresses currently in use are shown for the given interface and for each IP interface address. Multicast addresses are shown on separate lines following the interface address with which they are associated.

If the -f address_family option (with the -s option) is present, show per-interface statistics on the given interface for the specified address_family.
-i
Show the state of interfaces which have been auto-configured (interfaces statically configured into a system but not located at boot-time are not shown).

If the -a option is also present, multicast addresses currently in use are shown for each Ethernet interface and for each IP interface address. Multicast addresses are shown on separate lines following the interface address with which they are associated.

If the -f address_family option (with the -s option) is present, show per-interface statistics on all interfaces for the specified address_family.
-l
With the -g option, display wider fields for the IPv6 multicast routing table "Origin" and "Group" columns.
-M core
Extract values associated with the name list from the specified core instead of the running kernel.
-m
Show statistics recorded by the memory management routines (the network manages a private pool of memory buffers).
-N system
Extract the name list from the specified system instead of the running kernel.
-n
Show network addresses as numbers (normally netstat interprets addresses and attempts to display them symbolically). This option may be used with any of the display formats.
-P pcbaddr
Display the contents of the protocol control block (PCB) located at the kernel virtual address pcbaddr. PCB addresses can be obtained using the -A flag. This option can currently only be used to display TCP control blocks.
-p protocol
Restrict the output to protocol, which is either a well-known name for a protocol or an alias for it. Some protocol names and aliases are listed in the file /etc/protocols. The program will complain if protocol is unknown. If the -s option is specified, the per-protocol statistics are displayed. Otherwise the states of the matching sockets are shown.
-q
Only show interfaces that have seen packets (or bytes if -b is specified).
-r
Show the routing tables. If the -s option is also specified, show routing statistics instead.
-s
Show per-protocol statistics. If this option is repeated, counters with a value of zero are suppressed.
-T tableid
Select an alternate routing table to modify or query. Table 0 is the default table.
-t
With the -i option, display the current value of the watchdog timer function.
-u
Limit statistics or address control block reports to the AF_UNIX address family.
-v
Be verbose. Avoids truncation of long addresses.
-W interface
(IEEE 802.11 devices only) Show per-interface IEEE 802.11 wireless statistics.
-w wait
Show network interface statistics at intervals of wait seconds.

The default display, for active sockets, shows the local and remote addresses, send and receive queue sizes (in bytes), protocol, and the internal state of the protocol.

Address formats are of the form “host.port” or “network.port” if a socket's address specifies a network but no specific host address. When known, the host and network addresses are displayed symbolically according to the databases /etc/hosts and /etc/networks, respectively. If a symbolic name for an address is unknown, or if the -n option is specified, the address is printed numerically, according to the address family.

For more information regarding the Internet “dot format”, refer to inet(3). Unspecified or “wildcard” addresses and ports appear as a single ‘*’. If a local port number is registered as being in use for RPC by portmap(8), its RPC service name or RPC service number will be printed in “”[] immediately after the port number.

The interface display provides a table of cumulative statistics regarding packets transferred, errors, and collisions. The network addresses of the interface and the maximum transmission unit (MTU) are also displayed.

The routing table display indicates the available routes and their status. Each route consists of a destination host or network and a gateway to use in forwarding packets. If the destination is a network in numeric format, the netmask (in /24 style format) is appended. The flags field shows a collection of information about the route stored as binary choices. The individual flags are discussed in more detail in the route(8) and route(4) manual pages.

The mapping between letters and flags is:

1 RTF_PROTO1 Protocol specific routing flag #1. 2 RTF_PROTO2 Protocol specific routing flag #2. 3 RTF_PROTO3 Protocol specific routing flag #3. B RTF_BLACKHOLE Just discard pkts (during updates). C RTF_CLONING Generate new routes on use. c RTF_CLONED Cloned routes (generated from RTF_CLONING). D RTF_DYNAMIC Created dynamically (by redirect). G RTF_GATEWAY Destination requires forwarding by intermediary. H RTF_HOST Host entry (net otherwise). L RTF_LLINFO Valid protocol to link address translation. M RTF_MODIFIED Modified dynamically (by redirect). R RTF_REJECT Host or net unreachable. S RTF_STATIC Manually added. U RTF_UP Route usable. X RTF_XRESOLVE External daemon translates proto to link address.

Direct routes are created for each interface attached to the local host; the gateway field for such entries shows the address of the outgoing interface. The refcnt field gives the current number of active uses of the route. Connection oriented protocols normally hold on to a single route for the duration of a connection while connectionless protocols obtain a route while sending to the same destination. The use field provides a count of the number of packets sent using that route. The MTU entry shows the MTU associated with that route. This MTU value is used as the basis for the TCP maximum segment size (MSS). The ‘L’ flag appended to the MTU value indicates that the value is locked, and that path MTU discovery is turned off for that route. A ‘-’ indicates that the MTU for this route has not been set, and a default TCP maximum segment size will be used. The interface entry indicates the network interface utilized for the route.

When netstat is invoked with the -w option and a wait interval argument, it displays a running count of statistics related to network interfaces. An obsolescent version of this option used a numeric parameter with no option, and is currently supported for backward compatibility. This display consists of a column for the primary interface (the first interface found during autoconfiguration) and a column summarizing information for all interfaces. The primary interface may be replaced with another interface with the -I option. The first line of each screen of information contains a summary since the system was last rebooted. Subsequent lines of output show values accumulated over the preceding interval.

SEE ALSO

fstat(1), nfsstat(1), ps(1), systat(1), tcpbench(1), top(1), inet(3), netintro(4), route(4), hosts(5), networks(5), protocols(5), services(5), iostat(8), portmap(8), pstat(8), route(8), tcpdrop(8), trpt(8), vmstat(8)

HISTORY

The netstat command appeared in 4.2BSD. IPv6 support was added by WIDE/KAME project.

BUGS

The notion of errors is ill-defined.

AerieBSD 1.0 Reference Manual February 26 2010 NETSTAT(1)