STAT(2) AerieBSD 1.0 Refernce Manual STAT(2)

NAME

stat — lstat, fstat get file status

SYNOPSIS

#include <sys/types.h>
#include <sys/stat.h>

int stat(const char *path, struct stat *sb);

int lstat(const char *path, struct stat *sb);

int fstat(int fd, struct stat *sb);

DESCRIPTION

The stat(); function obtains information about the file pointed to by path. Read, write, or execute permission of the named file is not required, but all directories listed in the path name leading to the file must be searchable.

The lstat(); function is identical to stat(); except when the named file is a symbolic link, in which case lstat(); returns information about the link itself, not the file the link references. Unlike other file system objects, symbolic links do not have an owner, group, access mode, times, etc. Instead, these attributes are taken from the directory that contains the link. The only attributes returned from an lstat(); that refer to the symbolic link itself are the file type (S_IFLNK), size, blocks, and link count (always 1).

The fstat(); function obtains the same information about an open file known by the file descriptor fd.

The sb argument is a pointer to a stat(); structure as defined by ‹sys/stat.h› (shown below) and into which information is placed concerning the file. 

struct stat {
    dev_t      st_dev;    /* inode's device */
    ino_t      st_ino;    /* inode's number */
    mode_t     st_mode;   /* inode protection mode */
    nlink_t    st_nlink;  /* number of hard links */
    uid_t      st_uid;    /* user ID of the file's owner */
    gid_t      st_gid;    /* group ID of the file's group */
    dev_t      st_rdev;   /* device type */
    struct timespec st_atim;  /* time of last access */
    struct timespec st_mtim;  /* time of last data modification */
    struct timespec st_ctim;  /* time of last file status change */
    off_t      st_size;   /* file size, in bytes */
    int64_t    st_blocks; /* blocks allocated for file */
    u_int32_t  st_blksize;/* optimal blocksize for I/O */
    u_int32_t  st_flags;  /* user defined flags for file */
    u_int32_t  st_gen;    /* file generation number */
};

The time-related fields of struct stat are represented in struct timespec format, which has nanosecond precision. However, the actual precision is generally limited by the file system holding the file. The fields are as follows:
st_atim
Time when file data was last accessed. Set when the file system object was created and updated by the utimes(2) and read(2) system calls.
st_mtim
Time when file data was last modified. Changed by the truncate(2), utimes(2), and write(2) system calls. For directories, changed by any system call that alters which files are in the directory, such as the unlink(2), rename(2), mkdir(2), and symlink(2) system calls.
st_ctime
Time when file status was last changed (inode data modification). Changed by the chmod(2), chown(2), link(2), rename(2), unlink(2), utimes(2), and write(2) system calls.

In addition, all the time fields are set to the current time when a file system object is first created by the mkdir(2), mkfifo(2), mknod(2), open(2), and symlink(2) system calls.

For compatibility with previous standards, st_atime, st_mtime, and st_ctime macros are provided that expand to the tv_secs member of their respective struct timespec member. Deprecated macros are also provided for some transitional names: st_atimensec, st_mtimensec, st_ctimensec, st_atimespec, st_mtimespec, and st_ctimespec

The size-related fields of the struct stat are as follows:
st_blksize
The optimal I/O block size for the file.
st_blocks
The actual number of blocks allocated for the file in 512-byte units. As short symbolic links are stored in the inode, this number may be zero.

The status information word st_mode has the following bits: 

#define S_IFMT   0170000  /* type of file mask */
#define S_IFIFO  0010000  /* named pipe (fifo) */
#define S_IFCHR  0020000  /* character special */
#define S_IFDIR  0040000  /* directory */
#define S_IFBLK  0060000  /* block special */
#define S_IFREG  0100000  /* regular */
#define S_IFLNK  0120000  /* symbolic link */
#define S_IFSOCK 0140000  /* socket */
#define S_ISUID  0004000  /* set-user-ID on execution */
#define S_ISGID  0002000  /* set-group-ID on execution */
#define S_ISVTX  0001000  /* save swapped text even after use */
#define S_IRWXU  0000700  /* RWX mask for owner */
#define S_IRUSR  0000400  /* R for owner */
#define S_IWUSR  0000200  /* W for owner */
#define S_IXUSR  0000100  /* X for owner */
#define S_IRWXG  0000070  /* RWX mask for group */
#define S_IRGRP  0000040  /* R for group */
#define S_IWGRP  0000020  /* W for group */
#define S_IXGRP  0000010  /* X for group */
#define S_IRWXO  0000007  /* RWX mask for other */
#define S_IROTH  0000004  /* R for other */
#define S_IWOTH  0000002  /* W for other */
#define S_IXOTH  0000001  /* X for other */

The following macros test a file's type. If the file is of that type, a non-zero value is returned; otherwise, 0 is returned. 

S_ISBLK(st_mode m)  /* block special */
S_ISCHR(st_mode m)  /* char special */
S_ISDIR(st_mode m)  /* directory */
S_ISFIFO(st_mode m) /* fifo */
S_ISLNK(st_mode m)  /* symbolic link */
S_ISREG(st_mode m)  /* regular file */
S_ISSOCK(st_mode m) /* socket */

For a list of access modes, see ‹sys/stat.h›, access(2), and chmod(2).

RETURN VALUES

Upon successful completion a value of 0 is returned. Otherwise, a value of \-1 is returned and errno is set to indicate the error.

ERRORS

stat(); and lstat(); will fail if:
[ENOTDIR]
A component of the path prefix is not a directory.
[ENAMETOOLONG]
A component of a pathname exceeded NAME_MAX characters, or an entire path name exceeded PATH_MAX characters.
[ENOENT]
The named file does not exist.
[EACCES]
Search permission is denied for a component of the path prefix.
[ELOOP]
Too many symbolic links were encountered in translating the pathname.
[EFAULT]
sb or name points to an invalid address.
[EIO]
An I/O error occurred while reading from or writing to the file system.

fstat(); will fail if:
[EBADF]
fd is not a valid open file descriptor.
[EFAULT]
sb points to an invalid address.
[EIO]
An I/O error occurred while reading from or writing to the file system.

SEE ALSO

chmod(2), chown(2), utimes(2), symlink(7)

STANDARDS

Previous versions of the system used different types for the st_dev, st_uid, st_gid, st_rdev, st_size, st_blksize, and st_blocks fields.

The stat(); and fstat(); function calls are expected to conform to

HISTORY

A stat(); function appeared in Version 2 AT&T UNIX. An lstat(); function call appeared in 4.2BSD.

CAVEATS

The file generation number, st_gen, is only available to the superuser.

Certain programs written when the timestamps were just of type time_t assumed that the members were consecutive (and could therefore be placed directly to utimes(2/)). The transition to timestamps of type struct timespec broke them irrevocably.

BUGS

Applying fstat(); to a socket (and thus to a pipe) returns a zeroed buffer, except for the blocksize field, and a unique device and inode number.

AerieBSD 1.0 Reference Manual May 26 2009 STAT(2)